Cabin Sole
We can fabricate and finish all the sections of your cabin sole (with your
help), so that all you have to do is remove the old and slide in and affix (when
applicable) the new.
We can fabricate and finish all the sections of your cabin sole (with your
help), so that all you have to do is remove the old and slide in and affix (when
applicable) the new. We finish all sides (top, edges and bottom) with 4 coats of
varethane marine finish to keep the bottom from drawing water.
|
|
. |
Engineered Cabin Sole
We can fabricate and finish all the sections of your cabin sole (with your
help), so that all you have to do is remove the old and slide in and affix (when
applicable) the new. We finish all sides (top, edges and bottom) with 4 coats of
varethane marine finish to keep the bottom from drawing water.
|
To see an example of our cabin sole installed
click here. |
. |
For a Quote
To inquire about an estimate for our cabin sole you can email us the
following information:
- Type of boat / watercraft including year
- Brand.
- Length of Beam
|
|
Finish
on Cabin SoleFinishing consists of 4
coats of, Varethane marine finish, Man-o-War marine
varnish, or our own penetrating teak oil. Each coat is allowed to dry 24 hours
and receives hand sanding with 220 grit prior to the next coat of finish until
it has received 4 complete coats on the top, bottom and sides.
|
|
. |
Teak & Holly Cabin Sole Replacement.
Teak 2 3/8" wide
Holly 1/4" wide
Both 1/4" thick
Laminated to 1/2" Plywood
To see an example of our cabin sole
installed click here.
|
. |
. |
Finish on Cabin Sole
Why the finish and in 4 coats? When you laminate teak, and holly to any
surface other than teak & holly and the moisture content has the possibility of
changing as with all plywoods even marine plywood, the only way to assure a
straight, stable moisture free product is to envelope it in a film.
|
|
